LG commercial display control steps to enable Wake-on-LAN for Q-SYS control via the on-screen display menu.
If the display is powered off the main board and network port is turned off.You can enable Wake On Lan and send a magic packet to turn the TV back on or you can try enabling Network ready under the PM Mode in the Public display menu.To access the Public Display Menu do the following:
If the display is powered off the main board and network port is turned off.You can enable Wake On Lan and send a magic packet to turn the TV back on or you can try enabling Network ready under the PM Mode in the Public display menu.To access the Public Display Menu do the following:
- Press and hold down the settings button until menu goes away and channel banner appears.
- Type in 1105 and press the OK/Enter button
- Once in the public Display menu arrow down to General--> PM Mode --> Network Ready
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article