Once you remove the top screws, and slide the tube chassis off the fixture, you should see a little internal circuit board a LCD and with buttons to set the menu items.
You will want to set it as the IRGB-8bit profile for the 4ch RGBW vista profile. Then you can set the desired address. I also typically like to set ‘thermal mass’ to ‘fast’ so that the dimmer curve is as snappy as possible!
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article